Position within the page tree

Home
Team
Voigt, Michael

Michael Voigt

M.Sc.

Doctoral Researcher
Institut für Konstruktionstechnik und Technisches Design (IKTD)
Arbeitsgruppe Methodische Produktentwicklung

Contact

+49 711 685 65835
Email

Pfaffenwaldring 9
70569 Stuttgart
Deutschland
Room: 01.207

Subject

Beteiligt an Teilprojekten, inklusive Position:

A01 Entwicklung von Planungs-, Entwurfs- und Konstruktionsmethoden für adaptive Bauwerke, Projektbearbeiter

Publications

2022
1. D. Borschewski et al., “Ökobilanzierung adaptiver Hüllen und Strukturen,” Bautechnik, vol. 99, no. 10, Art. no. 10, Oct. 2022, doi: https://doi.org/10.1002/bate.202200067.
  - BibTeX
  - Link
  BibTeX
  @article{borschewski2022kobilanzierung, author = {Borschewski, David and Albrecht, Stefan and Bischoff, Manfred and Blandini, Lucio and Bosch, Matthias and Dazer, Martin and Efinger, Dshamil and Eisenbarth, Christina and Haase, Walter and Kreimeyer, Matthias and Leistner, Philip and Nitzlader, Markus and Roth, Daniel and Sawodny, Oliver and van den Adel, Friederike and Voigt, Michael and Weber, Simon}, doi = {https://doi.org/10.1002/bate.202200067}, journal = {Bautechnik}, month = {10}, note = {402 (peer-review)}, number = 10, pages = {731-745}, title = {Ökobilanzierung adaptiver Hüllen und Strukturen}, url = {https://doi.org/10.1002/bate.202200067}, volume = 99, year = 2022 }
  Link
  https://doi.org/10.1002/bate.202200067
2. M. P. Voigt, D. Roth, and M. Kreimeyer, “Main Characteristics of Adaptive Façades,” Proceedings of the Design Society: International Design Conference - Design 2022, 2022, doi: 10.1017/pds.2022.257.
  - BibTeX
  - Link
  BibTeX
  @article{voigt2022characteristics, abstract = {Adaptive façades (AF), unlike conventional façades, respond to their environment to reduce energy consumption while increasing comfort. The planning of AF presents architects and engineers with a variety of challenges. One central challenge is the specification of the right planning goals in the early phases. This paper identifies in a systematic literature review the main characteristics which were crucial in previous realizations of AF. Due to the comprehensive approach it provides a reference for the goal definition of subsequent projects and the development of further methodical support.}, author = {Voigt, Michael Patrik and Roth, Daniel and Kreimeyer, Matthias}, doi = {10.1017/pds.2022.257}, journal = {Proceedings of the Design Society: International Design Conference - Design 2022}, title = {Main Characteristics of Adaptive Façades}, url = {https://www.researchgate.net/publication/360411942_Main_Characteristics_of_Adaptive_Facades}, year = 2022 }
  Link
  https://www.researchgate.net/publication/360411942_Main_Characteristics_of_Adaptive_Facades
2021
1. H. Binz, M. Kreimeyer, D. Roth, M. Voigt, M. Bosch, and T. Burghardt, “Weltweit erstes adaptives Hochhaus mit adaptivem Tragwerk und adaptiven Fassaden,” Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP, pp. 5–7, Nov. 2021, [Online]. Available: http://www.wigep.de/fileadmin/download/wigep/FINAL_WiGeP_News_2021-2.pdf
  - BibTeX
  - Link
  BibTeX
  @article{binz2021weltweit, author = {Binz, Hansgeorg and Kreimeyer, Matthias and Roth, Daniel and Voigt, Michael and Bosch, Matthias and Burghardt, Timon}, issn = {1613-5504}, journal = {Newsletter Wissenschaftliche Gesellschaft für Produktentwicklung WiGeP}, language = {deutsch}, month = {11}, pages = {5-7}, title = {Weltweit erstes adaptives Hochhaus mit adaptivem Tragwerk und adaptiven Fassaden}, url = {http://www.wigep.de/fileadmin/download/wigep/FINAL_WiGeP_News_2021-2.pdf}, year = 2021 }
  Link
  http://www.wigep.de/fileadmin/download/wigep/FINAL_WiGeP_News_2021-2.pdf
2. M. Voigt, D. Roth, and H. Binz, “Challenges with adaptive facades - a life cycle perspective,” in 16th Advanced Building Skins Conference & Expo, Oct. 2021, vol. 16, pp. 459–468. [Online]. Available: https://www.researchgate.net/publication/355499453_Challenges_with_adaptive_facades_-_a_life_cycle_perspective
  - BibTeX
  - Link
  BibTeX
  @inproceedings{voigt2021challenges, abstract = {The widespread use of adaptive façades (AF) is currently still hindered by numerous challenges. The aim of this article is to identify the challenges associated with AF by means of a systematic literature review and an interview with experts. The literature review was based on four electronic databases, from which 57 relevant papers were identified. The expert interview, involving twelve experts from practical research and industry, supplemented the results. The challenges identified have been summarized in nine subordinate groups and further assigned to the respective phases of the lifecycle of AF in which they occur. Some of the challenges appear only in selected phases, and others throughout the entire lifecycle, although most of them could be assigned to the design phase. The article concludes with the derivation of a concrete need for methodological and procedural support in the planning of adaptive façades and thus forms the basis for further research to optimize existing planning approaches.}, author = {Voigt, Michael and Roth, Daniel and Binz, Hansgeorg}, booktitle = {16th Advanced Building Skins Conference & Expo}, isbn = {978-3-9524883-6-2}, language = {english}, month = {10}, pages = {459-468}, title = {Challenges with adaptive facades - a life cycle perspective}, url = {https://www.researchgate.net/publication/355499453_Challenges_with_adaptive_facades_-_a_life_cycle_perspective}, volume = 16, year = 2021 }
  Link
  https://www.researchgate.net/publication/355499453_Challenges_with_adaptive_facades_-_a_life_cycle_perspective
3. M. P. Voigt, S. Idrizi, D. Roth, and H. Binz, “Unterstützung bei der interdisziplinären Zusammenarbeit – Personenneutrale Wissenslandkarten,” in Stuttgarter Symposium für Produktentwicklung SSP 2021, 2021. doi: 10.18419/opus-11478.
  - BibTeX
  - Link
  BibTeX
  @inproceedings{voigt2021wissenslandkarte, abstract = {Adaptive Bauwerke bieten die Möglichkeit, den steigenden Anforderungen hinsichtlich des Ressourcenverbrauchs im Bauwesen zu begegnen, bedingen jedoch die enge Zusammenarbeit eines stark interdisziplinären Teams. Dieser Beitrag zeigt, wie das Verständnis über die Disziplinen verbessert und somit die Zusammenarbeit unterstützt werden kann. Der Ansatz ist dabei eine per-sonenneutrale, bildungsbasierte Wissenslandkarte, in der die Fertigkeiten und die Kenntnisse, die in unterschiedlichen Studiengängen erworben werden, dargestellt wird. Die Wissenslandkarten dienen als Ansatzpunkt für den interdisziplinären Exkurs und zeigen Gemeinsamkeiten sowie Un-terschiede zwischen den Stuttgarter Studiengängen der Disziplinen Architektur und Stadtplanung, Tragwerksplanung, Bauphysik, Maschinenbau, Systemdynamik und Umweltschutztechnik. Zusätz-lich zu den Ergebnissen wird innerhalb des Beitrags auch auf das Vorgehen zur Erstellung bildungs-basierter Wissenslandkarten und die dabei auftretenden Herausforderungen eingegangen.}, affiliation = {Frqckowiak, A (Reprint Author), Polish Acad Sci, Inst Mol Phys, PL-60179 Poznan, Poland. Frqckowiak, Arkadiusz; Swietlik, Roman, Polish Acad Sci, Inst Mol Phys, PL-60179 Poznan, Poland. Maulana, Lucky; Liu, Di; Dressel, Martin, Univ Stuttgart, Phys Inst 1, D-70550 Stuttgart, Germany. Jeannin, Olivier; Fourmigue, Marc, Univ Rennes, CNRS, Inst Sci Chim Rennes, UMR 6226, Campus Beaulieu, F-35042 Rennes, France.}, author = {Voigt, Michael P. and Idrizi, Sinan and Roth, Daniel and Binz, Hansgeorg}, booktitle = {Stuttgarter Symposium für Produktentwicklung SSP 2021}, doi = {10.18419/opus-11478}, editor = {Binz, Hansgeorg and Bertsche, Bernd and Spath, Dieter and Roth, Daniel}, eventdate = {20. Mai 2021}, issn = {2364-4885}, language = {deutsch}, publisher = {Stuttgart : Fraunhofer-Institut für Arbeitswirtschaft und Organisation IAO}, research-areas = {Chemistry; Science & Technology - Other Topics; Materials Science}, title = {Unterstützung bei der interdisziplinären Zusammenarbeit – Personenneutrale Wissenslandkarten}, unique-id = {ISI:000526394800006}, url = {http://dx.doi.org/10.18419/opus-11478}, year = 2021 }
  Link
  http://dx.doi.org/10.18419/opus-11478
4. M. P. Voigt, D. Klaiber, P. Hommel, D. Roth, H. Binz, and T. Vietor, “METHOD FOR IDENTIFYING SUITABLE COMPONENTS FOR FUNCTIONAL INTEGRATION – FOCUSING ON GEOMETRIC CHARACTERISTICS,” in Proceedings of the Design Society: International Conference on Engineering Design (ICED 2021), 2021, pp. 2047–2056. doi: 10.1017/pds.2021.466.
  - BibTeX
  - Link
  BibTeX
  @inproceedings{voigt2021functionalintegration, abstract = {The approach of functional integration has the potential to solve challenges regarding lightweight design and resource efficiency since the number of parts and therefore the weight and needed installation space can be reduced. One important step in developing integrative concepts is the pre-selection of suitable functions or components. Previous methods of pre-selection take various aspects into account. However, pre-selection based on these methods usually requires additional tables and forms, whose preparation and editing quickly becomes time-consuming. At the same time, most of the development engineers are working on CAD models. However, their use in the selection of suitable integration partners is not yet supported sufficiently. The development of more than 80 concepts on five different vehicles has shown that the consideration of geometric properties (position, orientation, size) is effective, as they can be identified with minimal analysis effort while working on CAD. In this paper a four-step procedure is presented how integration partners can be identified directly on the basis of CAD models. A following evaluation with development engineers in practice completes the research.}, author = {Voigt, Michael P. and Klaiber, Dominik and Hommel, Patrick and Roth, Daniel and Binz, Hansgeorg and Vietor, Thomas}, booktitle = {Proceedings of the Design Society: International Conference on Engineering Design (ICED 2021)}, doi = {10.1017/pds.2021.466}, eventtitle = {International Conference on Engineering Design}, language = {english}, pages = {2047 - 2056}, title = {METHOD FOR IDENTIFYING SUITABLE COMPONENTS FOR FUNCTIONAL INTEGRATION – FOCUSING ON GEOMETRIC CHARACTERISTICS}, url = {https://www.cambridge.org/core/journals/proceedings-of-the-design-society/article/method-for-identifying-suitable-components-for-functional-integration-focusing-on-geometric-characteristics/5FB99F41BE6C26F9DDC130DC17C489D9}, year = 2021 }
  Link
  https://www.cambridge.org/core/journals/proceedings-of-the-design-society/article/method-for-identifying-suitable-components-for-functional-integration-focusing-on-geometric-characteristics/5FB99F41BE6C26F9DDC130DC17C489D9

Akademische Ausbildung mit Abschluss

Maschinenbau (2013 – 2019), Spezialisierungsfächer Produktentwicklung und Konstruktionstechnik, Universität Stuttgart, Abschluss: Master of Science

Beruflicher Werdegang nach Studienabschluss

2019 – heute, Wissenschaftlicher Mitarbeiter am Institut für Konstruktionstechnik und Technisches Design, Arbeitsgruppe Methodische Produktentwicklung, Universität Stuttgart

Michael Voigt

Contact

Subject

Publications

2022

BibTeX

Link

BibTeX

Link

2021

BibTeX

Link

BibTeX

Link

BibTeX

Link

BibTeX

Link

Akademische Ausbildung mit Abschluss

Beruflicher Werdegang nach Studienabschluss

Audience

Formalities

Services

Organization